Friday, January 20, 2012

Warning Signs from the Cascadia Subduction Zone?


California Earthquake Map
CaliforniaEarthquake Map 01/20/2012
On January 17, 2012 a 4.3 magnitude earthquake occurred on the Cascadia Subduction Zone off the coast of Northern California. This relatively small quake could signal movement on this dangerous fault which has historically been silent between large events.

Lurking offshore of Northern California and running north toward Vancouver, Canada, lies the Cascadia Subduction Zone. This fault has the potential to produce an earthquake and tsunami as devastating as the March 11, 2011 quake that struck off Honshu, Japan. 

While the San Andres fault system has produced a long and obvious scar on the landscape of California and the frequency of small to moderate, non-damaging earthquakes has drawn the attention of the media and scientists, Cascadia remains locked quietly offshore for centuries, building stress until it suddenly releases in massive quakes.

Geological evidence shows seven great quakes have occurred along Cascadia in the last 3500 years. Intervals range from 200 to 900 years with most occurring around 300 years apart.


Cascadia Subduction Zone
Cascadia Subduction Zone
Cascadia last ruptured in January, 1700, producing an estimated 9.0 magnitude quake.  Recently researchers have shown the chances of a major quake occuring along Cascadia could be as high as 45 percent within the next 50 years.

Between these major quakes, Cascadia sits virtually silent. In fact, scientists were aware of its presence in the Pacific northwest, but it was not considered a threat as it appeared to never experience quakes.

Brian Atwater's 2005 study of drowned coastal forests lead to the discovery of Cascadia's hidden threat. It appears to remain virtually locked and silent for centuries, pressure and stress building until it is released in a giant quake.

According to Iris, Incorporated Research Institution for Seismology:
"...Just a quarter century ago, hardly anyone suspected that a giant underwater earthquake – or the fast-arriving tsunami that such an earthquake would spawn – could ever occur in the Pacific Northwest. The region’s written history, which begins a few decades before the arrival of Lewis and Clark, is devoid of such catastrophes. Yet today the Northwest has a widely acknowledged history, thousands of years long, of earthquakes as large as magnitude 9 and of associated tsunamis. "
Oregon Earthquake Map
Oregon Earthquakes1841 - 2002
Movement on the Cascadia has been virtually non-existent for more than a century. This map shows seismological history of Oregon for the time period from 1841 through 2002. Note the red line running north/south off the Pacific coast. This represents the Cascadia fault. Note the earthquakes occur near, but not on the fault itself.

Now look at this USGS map showing the Cascadia fault registering a 4.3 magnitude earthquake on January 17, 2011. This is a highly unusual place for movement to occur. The map also shows several small quakes in the days before the larger one.

Foreshocks, Aftershocks or Anomaly?

Large Earthquakes are often preceded by 'foreshocks' which can occur from minutes to even years before the main shock. They occur in about forty percent of moderate to large quakes and perhaps seventy percent of quakes greater than magnitude 7.0.

Studies show foreshocks may increase in intensity over time leading to the main quake:
    "The observation of foreshocks associated with many earthquakes suggests that they are part of a preparation process prior to nucleation. In one model of earthquake rupture, the process forms as a cascade, starting with a very small event that triggers a larger one, continuing until the main shock rupture is triggered. "
Cascadia quake
4.3 Cascadia quake 01/17/2012
Unfortunately it is not possible to know if a particular quake is part of a foreshock pattern until after a main event occurs.

Aftershocks are smaller quakes which occur as plates readjust following a larger event. They decrease in frequency as time passes.

Perhaps the small quakes in the preceding days were foreshocks to a main 4.3 quake on the 17th? This is certainly possible, however if the 4.3 was the culmination of this series, it should have been followed by decreasing aftershocks as the huge plates settled back into a locked position. There have been no such aftershocks.

Earthquake prediction is notoriously unreliable. Tantalizing hints of patterns give hope that someday we may be able to recognize the precursors to great quakes and evacuate populations before they strike.

The question arises: Is Cascadia stirring? The recent anomalous quake on the fault is noteworthy if only for its rarity.

There are great concerns that this area is not prepared for a quake of historical size. Cities from Eureka, California to Vancouver, Washington are potential targets.

Tsunami Evacuation Route, Oregon
According to Peter Yanev, an engineer and earthquake building consultant in this article:
    "... ...Pacific Northwest cities are full of buildings with slender structural frames and fewer and smaller shear walls. In a mega-quake, many of the region's iconic tall buildings would probably collapse. "
The Cascadia Region Earthquake Workgroup has prepared a hypothetical scenario of the effects of a rupture of Cascadia. Predictions include:
"...• Depending on location, strong shaking might be felt for several minutes.
• Injuries and fatalities could number in the thousands, and
hundreds of buildings could be destroyed.
• A destructive tsunami will quickly hit the Cascadia coast
and travel across the Pacific Ocean.
• Aftershocks up to M7 are common, creating the potential
for additional damage."
Without a doubt, the Cascadia Subduction Zone will someday unleash a great quake in the Pacific Northwest. The odds may be as high as 45% that it will strike during the lifetime of todays residents. Whether the quake that occurred on January 17 was a foreshock, aftershock or simply an anomaly, Cascadia will rupture someday. Perhaps it will happen tomorrow or a decade from now. Please prepare now. The clock is ticking.

Plan Ahead:
Disaster Preparedness Kits from Amazon
DIY Disaster Preparedness Kits


images: Oregon quake history: http://www.oregongeology.com/sub/earthquakes/eqepicentermap.htm
Cascadia Subduction Zone: http://en.wikipedia.org/wiki/Cascadia_subduction_zone
tsunami evac: http://www.flickr.com/photos/cornelii/2066817391/sizes/m/in/photostream/
Cascadia_subduction_zone: http://en.wikipedia.org/wiki/Cascadia_subduction_zone

2 comments:

  1. I like it because i was seeking for such type of info.
    I hope it benefits all one who land up here.
    Thanks for sharing!!
    Subaru Loyale AC Compressor

    ReplyDelete
  2. Hi there! You have an interesting and very informative page. I'll be looking forward to visit your page again and for your other posts as well. Glad to have a chance to drop by and learn additional information about this particular topic from your blog. Keep up the good work! Thank you so much for sharing your knowledge about hydrofracturing.
    In addition to that, I have read an article stating that fracturing is a method to stimulate shallow, hard rock oil wells dates back to the 1860s. It was applied by oil producers in Pennsylvania, New York, Kentucky, and West Virginia by using liquid and later also solidified nitroglycerin. Later, the same method was applied to water and gas wells. The idea to use acid as a nonexplosive fluid for well stimulation was introduced in the 1930s. Due to acid etching, fractures would not close completely and therefore productivity was enhanced. The same phenomenon was discovered with water injection and squeeze cementing operations.
    If your well runs out of water or does not supply an adequate quantity of water for your home or irrigation needs, you may want to consider hydrofracturing. Hydrofracturing is an affordable way to increase your well production.

    Hydrofracturing New Hampshire

    ReplyDelete